Heat exchanger and glow plug
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Assemble the fan shroud with the combustion unit and the heat exchanger.
Center the socket for the glow plug in the flame shield with the mounting on the heat exchanger.
Install:
- the glow plug in the heat exchanger.
NOTE:
If the glow plug can be screwed in by hand the glow plug socket in the flame shield has been centered correctly. Tighten to 15 Nm
.
- the protective sleeve on the glow plug.