Fuel injection nozzle, atomizer and outer nozzle head

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Injection Nozzle, Atomizer And Outer Nozzle Head

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the fuel injection nozzle and washer
NOTE: Gasoline and diesel versions have different fuel injection nozzles.
outer nozzle head (with washer against the gasoline fuel injection nozzle)
conical spacer with the cone pointing towards the outer nozzle head
atomizer.

on the screw.

Then install the screw and components onto the fan motor spindle. Tighten to 2 Nm .

Install the combustion chamber.

NOTE: The glow plug socket must be to the left of the lead-in for the fan motor wiring.