Receiver drier hoses

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use new O-rings lubricated with compressor oil.

Position the pipe on the mounting in the bracket. Position the pipe coupling on the receiver/dryer
Position the screw and tighten the pipe coupling on the condenser.

Tighten to 10 Nm .

Install the condenser. See Condenser, replacing (engine B5254T4) or Condenser, replacing (other engines).