Installing the sealing ring
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Lubricate the sealing ring lip. Use wheel bearing grease, P/N 116 1241-3
NOTE:
The drift has 2 sides.
The end of the locating pin without holes is for the 42 mm diameter early version sealing ring as shown.
Use special tool 9995772 .