LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Seal rings, connecting socket >> Removing the sealing ring from the gearbox

Removing the sealing ring from the gearbox

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drift 999 5779
GLL109590Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a screwdriver to pry out the seal.

Position drift 9995779 on the end of the differential to protect the sealing face from damage when removing the seal. Do not damage the surfaces in the transmission housing.