LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Seal rings, connecting socket >> Removing the sealing ring from the connecting socket

Removing the sealing ring from the connecting socket

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tapping Sealing Ring Out Of Socket Using Screwdriver
GLL109591Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a screwdriver to tap the sealing ring out of the socket.

Check the mating surface for the connecting socket. The socket must be replaced if there are signs of grooves or corrosion.

scientia non olet · About LEMON Manuals