LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Seal rings, connecting socket >> Installing tool

Installing tool

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Expander 9995777, Puller Rod 9995777 And Extractor 9995777
GLL109588Courtesy of VOLVO CARS OF NORTH AMERICA.

Install expander 9995777 and puller rod 9995777 (included in extractor 9995777) for the puller cylinder.

Puller cylinder 9995575 is used together with hydraulic pump 9995576 (foot-operated). Alternatively tool 9992615 can be used, which consists of a puller cylinder and a compressed-air driven hydraulic pump.