LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Seal rings, connecting socket >> Installing the sealing ring for the connecting socket

Installing the sealing ring for the connecting socket

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Sealing Ring 999 5780
GLL109593Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the sealing ring lip and the mating surface on the socket. Use ATF fluid.

Insert the seal ring to the sleeve. Tap the sleeve into place with drift 9995780 . Tap in the drift until it contacts the transmission housing.

scientia non olet · About LEMON Manuals