LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Seal CV joint housing, replacing >> Removal >> Removing the sealing ring for the CV joint housing from the wheel spindle

Removing the sealing ring for the CV joint housing from the wheel spindle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rubber Seal & Constant Velocity Joint
GLL106610Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully remove the sealing ring.

NOTE: The sealing ring will be used again during installation.
scientia non olet · About LEMON Manuals