Remove the drive shaft from the gearbox
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the splash guard under the engine. See Remove the splash guard under the engine
- the cover for the drive shaft pilot bearing.
Pull the drive shaft straight out from the gearbox.
NOTE:
Do not damage the drive shaft when removing it from the transmission.
CAUTION:
Later models have a rubber seal on the constant velocity joint. Do not damage the seal. It will be needed for installation.