Remove the ball bearings
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Turn the inner joint ring and ball holder. Remove the ball bearings clockwise one by one.
Use the marking as the starting point when removing. See Mark the outer constant velocity joint outer ring, ball holder and inner ring .
Place the ball bearings in order so that they can be reinstalled in the same positions.