LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Boot, half shaft, replacing >> Cleaning/checking the outer constant velocity joint >> Remove the ball bearing holder and the inner ring from the shaft

Remove the ball bearing holder and the inner ring from the shaft

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ball Holder And Inner Ring From Shaft
GLL108679Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the inner ring 90° in relation to the ball holder.

Remove the inner ring.

scientia non olet · About LEMON Manuals