Components that are included in the kit and must be replaced
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- the temperature/pressure sensor with O-ring
- washer
- the O-ring for the throttle valve seat.
Position the sealing plate in the control module
Press the throttle valve and temperature/pressure sensor into place on the control module contacts. Place the cupped washer with the convex side against the temperature/pressure sensor.
Lubricate the sealing rings on the valves with oil, P/N 116 1641-4 (0.3 liters).