Installing the flange

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Flange Using 999 5652 And 999 7058

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the flange on the AOC (Active on Demand Coupling) using the previous markings (if using the old flange).

Install a new nut for the shaft and flange. Use counterhold 9995652 with adapter 9997058 .

Tighten the nut. See Summary of tightening torques for specific components .

Fill the AOC (Active on Demand Coupling) with oil. Check the oil level. See Clutch (AOC), replacing .