LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Center Differential (Ambulance; 2003-2004) >> Final drive, transferring components >> Installation >> Installing the Active on Demand Coupling

Installing the Active on Demand Coupling

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Active On Demand Coupling
GLL109931Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the AOC (Active on Demand Coupling) on the new final drive.

Ensure that the gasket does not jump out of position.

Install the 4 M8 screws for the Active on Demand Coupling. Tighten.

Tighten the screws alternately and crosswise to light contact.