Removing track rods and control arms (both sides)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Press the wheel bearing housing upwards so that the tie rod is horizontal.
Remove the cable for the parking brake from the mounting in the tie rod.
Remove:
- the screw for the tie rod in the wheel bearing housing. Unhook the tie rod from the wheel bearing housing. Lift up the tie rod further so that the screw in the control arm is exposed
- the screws for the control arm. First press the control arm outwards. Move it downwards at the inner mounting. Remove the control arm.