Positioning the sealing panel in the control module

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Active On Demand Coupling Control Module Kit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press the choke valve and temperature/pressure sensor into place on the control module contacts.

Place the cupped washer with the convex side against the temperature/pressure sensor.

Lubricate the sealing rings on the valves with oil, P/N 116 1641-4 (0.3 liters).