LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Center Differential (Ambulance; 2003-2004) >> Clutch (AOC), replacing >> Installation >> Installing the Active on Demand Coupling

Installing the Active on Demand Coupling

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For tightening torques, see Tightening torque .
Fig 1: Active On Demand Coupling Bolts
GLL109935Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the coupling on the final drive housing.

Tighten the 4 M8 screws crosswise to light contact. Then tighten crosswise again.

Connect the connector to the wiring.