Installing the anti-roll bar

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Anti-Roll Bar

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the anti-roll bar on the rear axle member. Tighten to 80 Nm .

Tighten the control arms to the anti-roll bar. Tighten to 50 Nm .

Install the parking brake cable mountings onto the cover. Tighten to 10 Nm .