LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Center Differential (Ambulance; 2001-2002) >> Final Drive, Replacing >> Installation >> Preparations for the installation of the final drive

Preparations for the installation of the final drive

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Final Drive Housing
GLL109825Courtesy of VOLVO CARS OF NORTH AMERICA.

Lift the final drive together with the drive shafts so that the center of the drive shaft is slightly below the center of the wheel bearing housings.

Apply rust-proofing agent to the ends of the drive shafts.

Press out one  of the wheel bearing housings. Align the drive shaft in the hub.

Then align the other side.

scientia non olet · About LEMON Manuals