Installing the anti-roll bar on the rear axle member (both sides)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Anti-Roll Bar Mounting Screws Of Rear Axle Member

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install new lock nuts, M12. Tighten.

NOTE: Ensure that the cable for the parking brake passes above the ends of the anti-roll bar. Press the cables into place in the clamps on the heat deflector plate.