LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Center Differential (Ambulance; 2001-2002) >> Bushings in final drive housing, replacing >> Installing the final drive housing

Installing the final drive housing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Positioning Mobile Jack (998 5972) Together With Fixture (999 5972)
GLL109877Courtesy of VOLVO CARS OF NORTH AMERICA.

Lift the cover up to the final drive housing and rear axle member.

Install the 8 screws and the screw for the front bushing in the final drive.

Lightly tighten the screws alternately.

Then tighten the screws. Tighten to 100 Nm  .

scientia non olet · About LEMON Manuals