LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Rear Axle, Drive Shafts - Removal, Replacement And Installation) >> Center Differential (Ambulance; 2001-2002) >> Bearing viscous coupling, replacing >> Removal >> Removing the screw for holding the flange to the viscous coupling

Removing the screw for holding the flange to the viscous coupling

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Counterhold & Position Mark
GLL109869Courtesy of VOLVO CARS OF NORTH AMERICA.

Use counterhold 9995652 with adapter 9995759 .

Mark up the position of the coupling and flange. Use a marker pen.

Press and tap out the viscous coupling from the flange. Take care not to damage the viscous coupling by letting it fall.

scientia non olet · About LEMON Manuals