Installing the front cross member

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Crossmember Bolts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the cross member and the brake pipe in their holders
the screws for the exhaust bracket
the screws for the cross member. Tighten to 25 Nm .

Rivet the heat deflector into place.