Removing the screws for the torque rod from the transmission

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lower Transmission Oil Cooler Hose, Dipstick Pipe, And Transmission Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the screw for the front engine pad
the three screws for the transmission / engine. One screw is positioned above the ground lead in the transmission
the oil pipe from the transmission.

Plug the transmission and pipe.

Remove the 2 screws for the dip stick pipe.

Clear up any oil spill.