Removing the screw from the starter motor and the exhaust pipe from the turbocharger (TC)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Exhaust Flange Nuts And Starter Motor Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the 2 nuts for the exhaust flange
the exhaust pipe from the turbocharger (TC). Push the exhaust flange out of the way
the nut for the cable on the starter motor. Pull off the control cable
the screw for the starter motor
the starter motor.