Removing the control arms and tie rod (both sides)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the link for the anti-roll bar up at the spring strut. Counterhold using Torx 30. The rubber boot must not be twisted
- the tie rod from the wheel spindle. Use puller 9995259
- the screw for the drive shaft.