LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Transmission & Gear Selector Assembly - Cleaning, Inspection And Adjustment) >> Transmission, Automatic (B5254T2, Aw55-50/51SN; 2004) >> Oil grade, checking >> Removing the transmission >> Installing the lifting beam and lifting hook on the engine

Installing the lifting beam and lifting hook on the engine

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Lifting Beam And Lifting Hook Special Tools Installed On Engine
GLL105395Courtesy of VOLVO CARS OF NORTH AMERICA.

Position lifting hook 9995716 above the engine.

Connect lifting hook 9995460 under the two part lifting hook. Tighten to light contact.

Raise the car 

scientia non olet · About LEMON Manuals