Installing the upper torque rod

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Stabilizer Brace And Mounting Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the engine stabilizer brace. Tighten the mounting screws. Tighten to 50 Nm
the screw and a new nut for the engine mounting. Tighten to 80 Nm
the plastic guard over the spring strut (if applicable). Tighten the screws.