Installing the front cross member

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Cross Member

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screws for the exhaust pipe mounting. Tighten to 10 Nm
the brake pipe in its holders
the screws for the cross member. Tighten to 25 Nm .

Secure the heat deflector using rivets (early version).