Installing the engine pad on the engine mounting

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installing Engine Pad On Engine Mounting

Courtesy of VOLVO CARS OF NORTH AMERICA.

Take out the nut, a short extension bar and a socket.

Insert the nut into the socket so that it remains in place
Insert the extension bar up to the collision protection system using your left hand
Move up the engine pad to the engine mounting. Place the nut on the engine pad. Tighten the nut from above.