Installing engine compartment components

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Splash Guard Plate Screw And Upper/Lower Screws For Oil Pipe

GLL109646

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screw for the splash guard. Tighten to 25 Nm
the engine pad. Tighten to 50 Nm
the turbo pipe to the turbocharger (TC). Tighten the clamp
the lower screw for the oil pipe. Tighten to 25 Nm
the upper screw for the oil pipe
the connector
the tie strap around the electrical wiring.

Install the integrated relay / fusebox. See Install the integrated relay / fusebox .