Installing and tightening the screws for the transmission
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install all 6 screws for the transmission and engine.
At the same time, check that the whole of the transmission is in contact with the engine.
Then tighten the transmission / engine screws crosswise. Tighten to 50 Nm .
Remove the fixture from the transmission.
Install the 2 screws on the bracket at the cover for the differential housing.
Tighten the screws. Tighten to 50 Nm .