Removing the screws from the torque converter

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Alternative 1

Fig 1: Identifying Twisting Tool Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

Installing twisting tool 9995395 .

Turn the engine until the screws can be removed. Use a Torx tool (TX50).

Alternative 2

Fig 2: Locating Screw In Cut-Out Between The Engine And The Transaxle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Slacken off and remove the screws in the cut-out between the engine and the transaxle from below.

Turn the engine using a screwdriver in the cut-out under the transaxle.