LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Transmission - Removal, Replacement And Installation - 2 Of 2) >> Transmission, Automatic (B6284T, 4T65EV-Gt; 1999-2001) >> Transaxle, removing >> Removing the bracket for the heated oxygen sensor (HO2S) wiring

Removing the bracket for the heated oxygen sensor (HO2S) wiring

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Heated Oxygen Sensor Cable Bracket
GLL109251Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the screws for the bracket in the sub-frame holding the heated oxygen sensor (HO2S) cable. Push the bracket to one side.

Disconnect the connectors from the sub-frame.

Disconnect the heated oxygen sensor (HO2S) wiring from the sub-frame.

scientia non olet · About LEMON Manuals