Installing the lifting beam and lifting hook on the engine lifting eyelet

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lifting Beam And Lifting Hook Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Position the stand for lifting beam 9995716 on the upper wheel arch members.

Then position the lifting beam directly above the engine lifting eyes on both sides.

Connect lifting hook 9995460 . Tighten to light contact.