Installing the solenoid
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Apply a little petroleum jelly to the sensor O-rings.
Install the solenoid.
NOTE:
The small guide lug on the solenoid should be upwards on installation.
Twist and press in the solenoid so that it bottoms against the control system
Install:
- the spring clamp. Check that the spring clamp is locked
- the connector.