Mounting the oil pump and connector

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oil Pump Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Finger-tighten the screws. The two upper screw heads are sized M10. The other screw heads are M8.

First tighten the screws crosswise to light contact.

Then tighten M10 . Tighten to 16 Nm . Tighten M8 . Tighten to 12 Nm .

Install:

the connector
the cable harness and the temperature sensor in their respective clips.