Installing solenoid S2
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Apply a little petroleum jelly to the solenoid O-ring.
Install:
- the solenoid. Press the solenoid. Guide it in so that the locating pin on the side locates in the cut-out
- the spring clamp (check that it is locked)
- the connector.