Replacing the gasket, O-ring and strainer

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Gasket, O-Ring And Strainer

Courtesy of VOLVO CARS OF NORTH AMERICA.

Replace the O-ring on the piston.

Replace the gasket on the inner piston.

NOTE:

Check the position of the gasket on the piston.

Remove the strainer by pulling it straight up. Replace the strainer.