Replacing the gasket and O ring for the servo cylinder: Removal: Preparations
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Suck the oil from the transmission. See Collecting transmission fluid .
Take out a container for the oil.
Raise the car.
Remove:
- the splash guard under the engine. Blow and wipe clean around the transmission oil trough
- the transmission oil trough. See Remove the oil pan and the seal .