Assembling the servo cylinder

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Servo Cylinder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Apply a little petroleum jelly to the inner piston gasket. Use Volvo Genuine parts petroleum jelly (P/N 116 1151-4).

Carefully press the piston up into the cylinder.

Install the catch on the push rod.