Disconnecting the pressure sensor
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the clip for the cable harness from the pressure sensor
- the connector
- the screws.
NOTE:
The upper screw is M10. The two shiny screws are self tapping.
Disconnect the pressure sensor.
Check that all (6 x) O-rings remain in the pressure sensor.