Install the bracket on the cylinder block

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bracket Between Transmission And Engine

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the three screws for the bracket for the differential housing cover
the two screws in the differential housing cover.

Tighten all the screws in the differential housing cover. Tighten to 50 Nm .

Tighten the bracket screws. Tighten to 50 Nm .

NOTE:

There axial clearance must be 0.12 mm - 0.67 mm between the differential and the differential housing cover.