Installing the cover on the transmission
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
HINT: Two people are required to install the spring clip.
Apply a little petroleum jelly to the O-ring on the cover. Use Volvo Genuine parts petroleum jelly (P/N 116 1151-4).
Install the cover (carefully) and press it down towards the piston, as far as it will go.