Tightening the ball joint pinion and the anti-roll bar link
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Counterhold the ball joint pinion while tightening so that the ball joint boot cannot turn. Tighten to 80 Nm .
Tightening the anti-roll bar link
Use a new lock nut.
NOTE:
Counterhold the ball joint pinion while tightening so that the ball joint boot cannot turn. Tighten to 50 Nm .