Transferring the balls to the new valve housing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Balls In Valve Housing

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use Volvo Genuine parts petroleum jelly P/N 116 11 51-4 so that the balls remain in the relevant ducts during the installation of the valve housing.

Transferring

Balls 373 (2 x). Apply petroleum jelly to each duct. Install the balls (the petroleum jelly should cover the balls).

Balls 372 (4 x). Apply petroleum jelly to each duct. Install the balls.