Installing the valve housing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Removing/Installing Valve Housing

Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully install the valve housing over the pump shaft (Be careful with the (2) strainers).

CAUTION:

The valve housing may not be twisted.

Hold it in position against the housing and install the screws 377, lightly tightened.

Install guide sleeve 410 and the screw 376 on the valve housing tightened lightly.

NOTE:

The guide sleeve ensures that the distribution plate/valve housing are positioned correctly.