Installing the valve housing to the control system housing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Preparations
Check that:
- the surface of the valve housing is cleanNOTE:
Use lint-free paper.
- the balls remain in the petroleum jelly
- the pump shaft is in position
- the screws 377 to secure the valve housing are to hand
- the screw 376 and guide sleeve 410 are to hand.