LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Transmission - Removal, Replacement And Installation - 2 Of 2) >> Transmission, Automatic (B6284T, 4T65EV-Gt; 1999-2001) >> Installing the control system / valve housing >> Installing the balls for the control system housing

Installing the balls for the control system housing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Control System Housing Balls
GLL109642Courtesy of VOLVO CARS OF NORTH AMERICA.

Apply petroleum jelly (P/N 116 11 51-4) to each duct (372) for the balls.

Reinstall the balls. Ensure that the petroleum jelly holds the balls in place in the housing.

scientia non olet · About LEMON Manuals